ARRMA RC 1/10 Kraton 4X4 4S V2.5 Blx Speed Monster Truck Rtr:
Nyt uusi ARRMA Kraton 4x4 V2.5 on täällä!
4x4 sarjan hurjimmat versiot, ARRMA Outcast ja Kraton 4s versiot ovat mahtavat nelivetoiset monsterit. Huippusuosittu 4x4 sarja on osoittautunut luotettavaksi alustaksi ja ARRMA on parantanut auton kestävyyttä ja suorituskykyä uusimpia 4S-versioitaan varten.
Outcast on saatavilla perusversiona jossa mukana tulee kaikki paitsi akku ja laturi ja ohjaimen 4x AA paristoa mutta myös 3s ja 4s LiPo versiona missä mukana tulee kunnon älylaturi ja tehokas Lipo akku:
3s versiolla auto kulkee jo noin 65km/h ja on tarpeeksi tehokas kovaan käyttöön ja hieman edullisempi. 4s Versiossa on tehokkain mahdollinen akku jossa vauhtia on noin 80km/h. 3s pakettiin voi jälkikäteen päivättää myös 4s akun ostamalla pelkästään yhden 4s akun lisäksi.
+
Tuotteet»Ajovalmiit RC-autot (Sähkö-RTR)»
ARRMA RC 1/10 KRATON 4X4 4S V2 BLX 3s LiPo-Paketti
+
Tuotteet»Ajovalmiit RC-autot (Sähkö-RTR)»
ARRMA RC 1/10 KRATON 4X4 4S V2 BLX 4s LiPo-Paketti
Heti saatavilla
The KRATON® 4X4 4S BLX Speed Monster Truck RTR marks the next evolution of the ARRMA® 4X4 4S platform — longer, wider, and tougher than the previous chassis for no-holds-barred bashing action, with a Spektrum™ 4S brushless power system factory-installed.
V2.5 Key improvements:
-Metal center differential for increased traction
-Updated chassis with center diff module, hinge pin bracing, and dirt drain
-Outdrive protectors, taller side guards, and wishbone dirt guards
-Higher torque Spektrum S662 metal-geared digital servo with alloy case center
-Cooler running Spektrum Firma 120A V2 Smart ESC
-Improved driveability by removing swaybar
-Improved battery retention system with wire clips
Additional proven features:
Fully assembled, finished, and ready-to-run
Spektrum SLT3 2.4GHz transmitter and dual protocol SR315 receiver
Spektrum Firma 3668 2400Kv brushless motor with ARRMA heatsink and cooling fan
EXB all-metal gear diffs
EXB CVD front and rear driveshafts
Wide 17.72 inch front and rear track for aggressive bashing
Long 21.54 inch chassis and 13.98 inch wheelbase for stable handling
Rubber shielded bearings throughout
Center support brace for maximum durability
Double wishbone front and rear suspension
Oil-filled aluminum shocks with silicone O-rings
High shock towers for longer travel
Steering system with stone clearance
Tough black multi-spoke wheels
CNC machined, red anodized 17mm wheel hubs
Multi-terrain dBoots COPPERHEAD 2 LP vented low-profile tires
Adjustable turnbuckles
Adjustable ride height
Adjustable body mounts
Front bumper and protective lower front and rear skid plates
Wheelie bar with rubber tires
Overview
With massive tires, a menacing truck body, and a long wheelbase for stability, the 1/10 scale ARRMA KRATON 4S BLX Speed Monster Truck proudly takes its place between agile 3S BLX bashers and mighty 6S BLX machines. The 4S BLX platform lets you bash with next-level ARRMA performance, toughness, and speed, without breaking your budget. This KRATON comes fully factory-assembled on the latest evolution of the 4S BLX — and it’s prepared to blast like never before!
The strengthened, diff compatible chassis now includes a center diff module that holds an aluminum-cased center differential. It provides the ultimate traction for any surface conditions. Shielded to the max with wishbone dirt guards, outdrive protectors, and taller side guards, the KRATON 4S BLX stands up to furious blasting over dirt, through grass, and on paved surfaces, all with equal ease.
ARRMA has amped up its 4S-capable Spektrum brushless power system for intense all-road action. A cool-running Spektrum Firma 120A Smart V2 waterproof ESC with IC5 connectors (EC5 compatible) adds punch and improves the driving feel. Steering has been strengthened with a higher torque Spektrum S662 metal-geared digital servo, sharpening the KRATON 4S BLX truck’s high-speed maneuvering capabilities.
These updates join a vast arsenal of proven ARRMA 4S BLX features — from high shock towers, long oil-filled shocks, and wide arms for plush suspension travel, to steel diff gears and EXtreme Bash CVD front and rear driveshafts for unstoppable power delivery. The KRATON 4S BLX also incorporates the signature ARRMA easy-access modular design to make routine maintenance fast and simple.
Made of high-quality rubber, the vented dBoots COPPERHEAD 2 LP tires have an aggressive, chunky tread pattern that finds a solid grip almost anywhere. The truck body has a tough, injection-molded rear wing and comes factory-finished in your choice of two fresh color schemes. Front and rear bumpers protect against impacts and a wheelie bar with rubber tires provides stunt potential.
Fully ready-to-run, the ARRMA KRATON 4S BLX Speed Monster Truck comes with a 3-channel Spektrum SLT3 2.4GHz radio and dual protocol SR315 receiver. Charge up your choice of recommended battery and blast with the best!
PROVEN 4X4 PLATFORM FEATURES
- Rubber shielded bearings
- Metal internal-geared diffs
- Steel spur gear
- Strong composite chassis with extended height dirt defenders
- Adjustable turnbuckles
- Steering system with stone clearance
- ARRMA® motor heatsink and cooling fan
- Easy-access modular design — power, diff and electronics modules can be removed quickly and easily for maintenance
- Battery retention system including wire clips
- 2-Year limited warranty (see website support for details)
A BIGGER, TOUGHER KRATON® 4X4 4S BLX
The original ARRMA® KRATON® 4X4 4S BLX Speed Monster Truck provided the perfect middle ground between the agile 3S BLX vehicles and bigger, more powerful 6S BLX machines. It delivered affordable performance for brushed bashers looking to upgrade and for any driver wanting ARRMA® toughness and speed.
This new version marks the next evolution of the capable ARRMA® 4X4 4S platform — longer, wider, and tougher than the previous chassis for even greater stability and control. It also includes a full package of Spektrum™ radio electronics and is the first ARRMA® 4X4 to come equipped with a Spektrum™ 4S brushless power system.
The footprint of this KRATON® 4X4 4S BLX Speed Monster Truck is 16% larger than the previous model, with higher shock towers, longer shocks, and wider suspension arms for longer, more plush suspension travel. The strength of the transmission has been bolstered with the inclusion of steel gearbox input gears, steel main diff gears and CVD Driveshafts. Upgrades are joined by proven features from before that deliver unstoppable performance in environments ranging from off-road, dirt, and grass to parking lots, paved and asphalt surfaces. These include a strong composite chassis and retained hinge pin plates; protective skid plates in front and rear; steering with more clearance for stones; a castellated slipper pad and sliding gear mesh; and rubber-shielded bearings throughout. The KRATON® 4X4 4S BLX also incorporates the signature ARRMA® easy-access modular design to make routine maintenance fast and simple.
Made of high-quality rubber, the dBoots® Copperhead 2 LP tires offer an aggressive, chunky tread pattern for excellent traction on a wide range of surfaces. They're also vented to disperse water for improved durability. The truck body has a tough, injection-molded rear wing and comes factory-finished in your choice of two exciting colors. Front and rear bumpers protect against impacts and a wheelie bar with rubber tires provides stunt potential.
Completing the ready-to-run package are a Spektrum™ SLT3™ 2.4GHz radio with SR315 receiver and a stronger, faster Spektrum™ S652 digital servo. Add your choice of battery, charger, and "AA" transmitter batteries and bash with the best!
LONGER CHASSIS
For this new version of the KRATON® 4X4 4S BLX Speed Monster Truck, ARRMA® engineers lengthened the vehicle to 21.54 inches – 0.74 inches longer than previous model — for increased stability and control.
WIDER TRACK
To handle more aggressive bashing, the front and rear track width has been increased with new, wider arms to 17.72 inches – 1.89 inches more than the previous KRATON® 4X4 4S BLX Speed Monster Truck.
DESIGNED TOUGH
Features that contribute to the 4X4 4S BLX platform's unstoppable performance include a stronger composite chassis and retained hinge pin plates; protective skid plates in front and rear; steering with more clearance for stones; a castellated slipper pad and sliding gear mesh; and rubber-shielded bearings throughout. Extended height dirt defenders limit the amount of dirt and debris that can reach the chassis tub. Front and rear bumpers offer defense against impacts.
MODULAR DESIGN
The KRATON® 4X4 4S BLX Speed Monster Truck RTR incorporates the signature ARRMA® easy-access modular design. Separate, easily removable chassis modules for the power system, electronics and differential components make routine maintenance fast and simple.
BIG BORE OIL-FILLED SHOCKS
Longer, aluminum-bodied, oil-filled big bore shocks are included and mounted on higher shock towers. These plus the wider suspension arms give the vehicle longer, more plush suspension travel.
WHEELS & TIRES
The high-quality rubber dBoots® Copperhead 2 LP tires are vented to disperse water for improved durability. Their multi-surface, chunky tread pattern delivers awesome traction on a wide range of surfaces. The tires are mounted on tough, 3.8" MT wheels with CNC machined, red anodized 17mm hubs.
STEEL INPUT & MAIN DIFF GEARS
The input and main differential gears are now manufactured from steel. Combined with the steel internal differential gears these provide an extremely strong transmission for the KRATON® 4X4 4S BLX Speed Monster Truck.
CVD SLIDER DRIVESHAFTS
The driveshafts on the KRATON® 4X4 4S BLX Speed Monster Truck are now a CVD design. These feature strong, hard wearing steel couplings and axles. The sliders are manufactured from a tough, impact absorbing composite material.
FINISHED TRUCK BODY
The sleek truck body features a tough, injection-molded rear wing and comes factory-finished in your choice of two exciting colors. Front and rear bumpers protect against impacts and a wheelie bar with rubber tires provides stunt potential.
SPEKTRUM™ SLT3™ 2.4GHZ 3-CHANNEL TRANSMITTER
- Fast response SLT™ protocol
- Foam wheel
- Improved grip and trigger feel
- Improved wheel and trigger force
- 2-Way thumb switch 3rd channel
- 50% and 75% Throttle mode (for beginners)
- Tactic® SLT™ receiver compatible
SPEKTRUM™ SR315 3-CHANNEL DUAL PROTOCOL RECEIVER
- Fast response rate and outstanding range
- SLT™ and DSMR® protocol compatible
- No-tool binding and protocol switching
- Compact and lightweight hard case
- Spektrum Smart telemetry compatible (in DSMR® mode and using Spektrum™ Dashboard™ app)
SPEKTRUM™ S652 DIGITAL SERVO
- 32% stronger and 5% faster than previous version's ADS-15M servo for improved steering feel
- Torque: 16.70 kg-cm (232 oz-in) @ 6.0V
- Metal-Geared
- Waterproof*
SPEKTRUM™ FIRMA™ 120A SMART ESC
- Forward/reverse/brake
- Input voltage 11.1V-14.8V
- Input connector IC5® with 12AWG, 220mm wire
- Output connector 4mm female bullet with 12AWG, 150mm wire
- Fast, powerful 32-bit ARM M4 processor
- Rugged plastic case with mounting tabs
- Aluminum heat sink for high efficiency
- Cooling fan
- High-power BEC
- Smart telemetry compatible
- Waterproof*
